A and H Models  

  Home > Model Scenics, Buildings, Figures and Accessories > Viessmann > Viessmann OO/HO Gauge

Viessmann eMotion moving figures and vehiclesViessmann eMotion moving figures and vehicles

5224  DCC Control for colour light Block signal
VN52245224 DCC Control for colour light Block signal

 Viessmann  5224 DCC Control for colour light Block signal. In Stock

The module offers an integrated digital decoder (Märklin-Motorola, NMRA-DCC) and is used to control 2 colour light signals (one home signal and one distant signal) with LEDs and a common plus pole or bulbs, provided they do not draw more than 200 mA in total. Therefore it is suitable for all signals scale 0 up to Z (except for the Viessmann signals with multiplex-technology). It can be activated in conventional mode via the push button panels item-No. 5545, 5546 and 5547 or via a digital signal. It is equipped with Viessmann Signalbus and can be configured for the following applications: 2 or several aspect colour light signal: A 2-aspect home signal with the aspects proceed and stop requires the push button panel item-No. 5547 (for 4 signals) or a digital address. A signal with 3 or 4 aspects with the additional aspects proceed slowly and shunting permitted requires the push button panel item-No. 5546 (3-aspect, 2 signals) resp. item-No. 5545 (4-aspect, 2 signals) resp. a digital operation 2-aspect. Distant signal or block signal: By configuration as a block signal the module responds automatically to the status of the corresponding track sector. This works only in conjunction with track occupancy detectors with continuous output. Per signal sector up to 2 track sectors are required. In this mode the module changes automatically to proceed if the following sector is clear (un-occupied). If one of the two sectors is occupied, the module switches to stop. Own distant signal or distant signal on the same mast: The signal module controls the main signal and the corresponding distant signal or the distant signal of a following main signal mounted on the same mast. In that case the distant signal will show the dark aspect when the main signal shows stop. Interrupt track supply or switch on brake generator when stop aspect is shown: With the relay for automatic train control item-No. 5228 the module can stop trains automatically either by interrupting the track voltage in front of the signal or – more prototypical – with the digital brake module item-No. 5232 (Märklin Motorola) or a brake generator (for NMRA-DCC). Signal with aspects stop and proceed slowly: If required you can configure the module to permit these two aspects only. In that case the module can be activated via the push button panel item-No. 5547 or a digital address. Regardless if the module is triggered by push buttons or track contacts the logic always assures that the red button has preference if two or more devices provide conflicting commands. Soft change of signal aspects

rrp £59.00 Special Price £37.50
6850 Smoke fluid 100ml
VN68506850 Smoke fluid 100ml

 Viessmann  6850 Smoke fluid 100ml In Stock

This smoke fluid is designed to be used in model railway smoke generators - It evapourates entirely leaving no residue.
M70392 DCC/MFX Home Signal
M70392M70392 DCC/MFX Home Signal

TRIX / Märklin  70392 DCC/MFX Home Signal lattice mast. EpIII-V HO In Stock

rrp £79.00 Special Price £62.50
Digital Home Signal with motor drive.
Two aspects: Hp0 (Stop, Red), Hp1 (Go, Green).
Can be used with DCC systems.  The mechanism may be mounted above or below the baseboard.

VN6330 Flood lamp
VN6330VN6330 Flood lamp

 Viessmann   6330 Flood Lamp. 14-16 v AC or DC  HO In Stock

VN6364  Modern platform light
VN6364VN6364 Modern platform light

 Viessmann  6364 Modern platform light. 70mm high. 14-16 v AC or DC  HO In Stock


 Return to main site View Cart