A and H Models  
   
 

  Home > European Model Railways > Kato > Kato N Unitrack > Kato Unitrack Help Section > Using Kato Unitrack with DCC


Film 1 using Unitrack with a DCC System:
 

Film 2  DCC Control of Unitrack Points:
 
 
Film 3  DCC Control of Unitrack Points Roco Z21:

Film 4: Using the 20-283 turntable with DCC.  The Lenz LK200 reverse loop module can be used with any good quality DCC System:

ImageCodeNameDescriptionPriceQty 
11150 LS150 Accessory decoder for 6 turnouts
LENZ1115011150 LS150 Accessory decoder for 6 turnouts

Lenz 11150 LS150 Accessory decoder for 6 turnouts 
 
The DIGITAL plus LS150 turnout decoder provides cost effective turnout control for up to 6 independent turnouts.

  • Suitable for twin-coil snap action switch machines
  • Suitable for motorized switch machines
  • High current provision to support Peco and Atlas switch machines
  • The 6 turnout addresses can be sequential or up to 6 user selected addresses.
  • Control using separate push-buttons possible.
  • Configuring the LS150 does not require a separate programming track and the parameters can be changed at any time in the future even after installation

LS150 Manual

A & H Help page for LS150

£58.25
12200 LK200 Reverse-loop module
LENZ1220012200 LK200 Reverse-loop module

Lenz  12200 LK200 Reverse-loop module 

This newly developed module LK200 is safe due to fault current principle, polarity change takes place at 100mA residual current, indicated by LED. Switching is carried out electronically without  a relay giving high change speed and no mechanical wear. Wiring is very easy (like LK100), no additional control connections, sensor tracks or the like required. Maximum load capacity: 5A.

The LK200 is the real solution for reverse loops, triangles and turntables: easy wiring, high switching speed and as much safety as possible.  Make you reverse sections long enough to accommadate the longest train that will use them so that you do not bridge both ends of the insulated track at the same time.


The LK200 is not intended to switch polarity on the frogs (Vee) of Electrofrog diamond crossovers  (Peco SL-E193 SL-E194...)

Link to LK200 Manual - PDF with German, English and French instructions

£72.50


 
 Return to main site View Cart