A and H Models  
   
 

  Home > Uhlenbrock DCC Digital > LocoNet wiring system

Uhlenbrock 63330 LocoNet Feedback Module
Uhlenbrock 63330 LocoNet Feedback Module
 

Uhlenbrock 63330 LocoNet Feedback Module


Uhlenbrock 63330 LocoNet Feedback Module 16 feedback inputs that can be triggered by Push buttons, toggle switches or magnets and reed switches.  This Feedback module can also be used with the Marklin 3-rail system

On a model railway feedback modules give you information about whether a track is occupied or not. That is very useful for a storage yard, for example, because in most cases they are out of sight.

Feedback modules are essential if the model railway is to be automated or controlled with a computer program. The automatic or the program needs the information from feedback modules to decide whether a train is permitted to enter a certain track or which route is to be activated.
When used for 2-rail DCC layouts
The feedback module 63330 can provide 16 feedback inputs that can be controlled by push buttons, toggle switches or reed switches (These are activated by magnets attached to passing trains) - {Please note Magnets and reed switches cannot be used with Kato Unitrack as the passing magnets can operate the point motors!}
As an additional feature, each of the 16 feedback inputs may be programmed to trigger two solenoid addresses when the 'occupied' signal is sent and another two solenoid addresses when the feedback returns to 'vacant'.  This really helps when organising a marshalling yard or busy station. - More Information
When used on Marklin 3-rail  - All functions in one module!
The feedback module 63330 for 3-rail track provides all functions for digital feedback in a single module: track occupation detection (for16 track sections), feedback to the center and power monitoring.
The track occupation detector checks whether there is a power load in its track section. That can be a locomotive, a lit wagon or a wagon whose axle was bridged with resistance lacquer (Part No. 40410). If a current of at least 1mA flows in the monitored track section, the section is reported as “occupied”; if no current flows then the section is “vacant”.
As an additional feature, each of the 16 feedback inputs may be programmed to trigger two solenoid addresses when the 'occupied' signal is sent and another two solenoid addresses when the feedback returns to 'vacant'. This reaaly helps when organising a marshalling yard or busy station.


GTIN: 40033405633302


Our Price: £47.50







« Back

 
 Return to main site View Cart