A and H Models  
   
 

  Home > Lenz Digital Products > Lenz Digital-plus Start Sets > Notes on LH100 Handset



The UK edition of SET100 and LH100 Handsets arrive with an English Manual however this lists the menus as you would see them if you had set the handset language to English.  Below is a conversion table showing the menus in English and German:

English
German
Menu
SET-F
SET-F
Setting Decoder Functions
DH
DTR
Double Heading (Quickly assign two locos to function as a double header)
MU
MTR
Multi-Unit Consist (Setting up a number of locos to work as a single unit)
S/T
S/W
Switching Menu (Control of points, signals and relays)
OD
RM
Display Feedback Information (Occupancy Detection)
PoM
PoM
Programming on the Main
PROG
PROG
Programming on the Programming Track
SYS
SYS
System Settings

To set the handset language to English

1.       Press F until SYS is displayed then press Enter the unit will now show SYS _
2.       Press 1 then Enter and the unit will display SET _
3.       Press 2 then Enter and NAT∙D will come up on the screen
4.       Pressing + or- will scroll until NAT∙US shows. Press Enter to confirm then press Esc until you return to the locomotive screen you will now have E∙0003 as opposed to L∙0003 showing.
The Menus will now correspond to the screens shown in the English instructions

SET100 Version 3.6 System Overview (with English commands displayed)


ImageCodeNameDescriptionPriceQty 
21101 LH101 Hand controller
LENZ2110121101 LH101 Hand controller

Lenz 21101 LH101 Hand controller

New product  - Please note English Language version of the handset now available in the UK.  UK manual available in latest versions - Professionally printed and bound by a local Brackley Firm.
Help pages for the new LH101

  • 9999 addresses for digital locomotives
  • Rotary Speed control
  • addresses are entered via number keys
  • one key allows you to change between the last two addresses ('toggle')
  • Stack of 8 loco addresses for your loco collection (Easy to overwrite with new addresses)
  • Control of 29 Locomotive decoder functions (Lights, Smoke, Sound...)
  • Locomotive decoder functions can be switched or momentary operation (Momentary is useful for bells and whistles)
  • another key serves to change the direction of travel
  • emergency stop key serves to stop all locomotives immediately
  • display indicates the function
  • synchronised control of several locomotives into a double or multiple traction
  • if a switch decoder (that supports the feedback function) is used, the LH101 can feed back the real status of points
  • this function also allows feedback on the status of the inputs of feedback modules LR101
  • Program locomotive and accessory decoders - Programming track and Programming on main (PoM)
  • up to 1024 points, signals, magnetic articles and other accessories can be controlled.
  • New Routes Mode
  • New Club mode  Handset can be limited to a single loco for an inexperienced driver to operate.
  • Works with the LZV100 Version 3.6 Software
£165.00
60101 Set 101 Startset with hand controller LH101
LENZ6010160101 Set 101 Startset with hand controller LH101

Lenz  60101 Set 101 Startset with hand controller LH101

Now available
Help Section

English manual for LH101 Handset 
(Manual - German, English French)

English manual for LZV200 PDF download  (Manual - German, English French )

For large model railway layouts where many motor vehicles, points and signals are used.

  • for up to 9999 digital motor vehicles and 1 analog locomotive
  • setting of 4-digit locomotive addresses
  • 14, 27, 28 or 128 speed steps
  • 28 functions for each locomotive
  • double- and multiple-traction
  • the setting of automatic control is optional
  • Separate Programming track outputs
  • CV programming from CV1 to CV1024
  • higher requirements are met by adding (an infinite number of) additional amplifiers - LV103
  • connect up to 31 input devices to our universal input bus XpressNet.
  • programming in operational mode (PoM)
  • up to 2048 points, signals and other magnetic articles can be switched, depending on the control device used.
  • feedback bus to connect feedback modules and switch decoders that support the feedback function.
  • The LZV200 can generate the RailCom Signal (Global RailCom from LH101 V2.0)
  • Model Clock (LH101 V2.0)
  • Integrated USB PC Interface
  • Future updates can be applied using a memory stick

Each set comes with a LZV200 device (which is an amplifier plus command station) and an LH101 hand-held control device.

This set needs an additional Transformer.  There is the choice of the TR100 (3 Amp) or the TR150 (5 Amp)
 
£365.00


 
 Return to main site View Cart