A and H Models  
   
 

  Home > DCC Digital Command Control Help + other items of help for Railway Modellers > The Lenz Digital Plus DCC System > Lenz SET100

Flow Chart for the LH100 MenusFlow Chart for the LH100 Menus
Lenz SET 100 1.1 Getting StartedLenz SET 100 1.1 Getting Started
Lenz SET100 1.2 More on Loco CV ProgrammingLenz SET100 1.2 More on Loco CV Programming
Lenz SET100 1.3 Multi-TractionLenz SET100 1.3 Multi-Traction
Lenz SET100 2.0 Switching points and accessoriesLenz SET100 2.0 Switching points and accessories
Lenz SET100 3.0 RailComLenz SET100 3.0 RailCom
Lenz SET100 Software Version 3.6Lenz SET100 Software Version 3.6
Older units with Version 3.0 and higher may be updated to version 3.6 at the A & H Shop - by post or by appointment
Lenz LH101 Help sectionLenz LH101 Help section
New hand controller Out now - replaces LH90 and LH100
SET101 + LZV200 Command StationSET101 + LZV200 Command Station
The new (2019) Lenz Set101 (Item 60101) and the LZV200 command station (Item 20200)

ImageCodeNameDescriptionPriceQty 
21101 LH101 Hand controller
LENZ2110121101 LH101 Hand controller

Lenz 21101 LH101 Hand controller

New product  - Please note English Language version of the handset now available in the UK.  UK manual available in latest versions - Professionally printed and bound by a local Brackley Firm.
Help pages for the new LH101

  • 9999 addresses for digital locomotives
  • Rotary Speed control
  • addresses are entered via number keys
  • one key allows you to change between the last two addresses ('toggle')
  • Stack of 8 loco addresses for your loco collection (Easy to overwrite with new addresses)
  • Control of 29 Locomotive decoder functions (Lights, Smoke, Sound...)
  • Locomotive decoder functions can be switched or momentary operation (Momentary is useful for bells and whistles)
  • another key serves to change the direction of travel
  • emergency stop key serves to stop all locomotives immediately
  • display indicates the function
  • synchronised control of several locomotives into a double or multiple traction
  • if a switch decoder (that supports the feedback function) is used, the LH101 can feed back the real status of points
  • this function also allows feedback on the status of the inputs of feedback modules LR101
  • Program locomotive and accessory decoders - Programming track and Programming on main (PoM)
  • up to 1024 points, signals, magnetic articles and other accessories can be controlled.
  • New Routes Mode
  • New Club mode  Handset can be limited to a single loco for an inexperienced driver to operate.
  • Works with the LZV100 Version 3.6 Software
£165.00
26001 TR100 Transformer 15v, 45vA
LENZ2600126001 TR100 Transformer 15v, 45vA

Lenz 26001 TR100 Transformer 15V, 45VA for small & medium gauges. Item 26000 with a UK three pin plug

£66.95
26150 TR150 Transformer 15v, 70vA
LENZ2615126150 TR150 Transformer 15v, 70vA

Lenz  26151 TR150 Transformer 15v, 70vA. for large gauges. Item 26150 with a UK three pin plug

£83.25
60101 Set 101 Startset with hand controller LH101
LENZ6010160101 Set 101 Startset with hand controller LH101

Lenz  60101 Set 101 Startset with hand controller LH101

Help Section


English manual for LH101 Handset (Manual - German, English French)

English manual for LZV200 PDF download  (Manual - German, English French )

For large model railway layouts where many motor vehicles, points and signals are used.

  • for up to 9999 digital motor vehicles and 1 analog locomotive
  • setting of 4-digit locomotive addresses
  • 14, 27, 28 or 128 speed steps
  • 28 functions for each locomotive
  • double- and multiple-traction
  • the setting of automatic control is optional
  • Separate Programming track outputs
  • CV programming from CV1 to CV1024
  • higher requirements are met by adding (an infinite number of) additional amplifiers - LV103
  • connect up to 31 input devices to our universal input bus XpressNet.
  • programming in operational mode (PoM)
  • up to 2048 points, signals and other magnetic articles can be switched, depending on the control device used.
  • feedback bus to connect feedback modules and switch decoders that support the feedback function.
  • The LZV200 can generate the RailCom Signal (Global RailCom from LH101 V2.0)
  • Model Clock (LH101 V2.0)
  • Integrated USB PC Interface
  • Future updates can be applied using a memory stick

Each set comes with a LZV200 device (which is an amplifier plus command station) and an LH101 hand-held control device.

This set needs an additional Transformer.  There is the choice of the TR100 (3 Amp) or the TR150 (5 Amp)
 
£365.00
80001 LY001 Connector set
LENZ8000180001 LY001 Connector set

Lenz  80001 LY001 Connector set 

Pluggable terminal screws for LZV100, LV102
the set comprises: one 3-pin plug, two 4-pin plugs and one 5-pin plug

£22.50


 
 Return to main site View Cart