A and H Models  
   
 

  Home > Lenz Digital Products > Lenz Loco Decoders



The Advantages of the Lenz Locomotive Decoder Range
Click for Lenz Decoder Flyer
All Lenz decoders have the following features:

  • Super smooth locomotive running whether it is low speed shunting or accelerating a decelerating
  • Full conformance with the NMRA DCC Recommended practices
  • 9,999 locomotive addresses may be used
  • Locomotives fitted with Lenz decoders can still run on 12v DC (analog) layouts
  • RailCom feedback signal 
  • Multi-Traction is possible (on DCC systems that support it)
  • Decoders can run on 14/27 and 28/128 speed step formats allowing them to be used on both new and old DCC Systems.
  • 10 Year Manufacturers warranty  


The SILVER decoder range:

Silver decoders have all the features of the Standard decoder plus they also work with the Lenz Automatic Braking Control System (ABC)

Silver Mini decoders and Silver PluX12 have solder points for S.U.S.I. so a sound module may be connected

The GOLD Decoder range:

In addition to all the features of the Silver decoder, Gold decoders have solder pads for the Lenz Uninterrupted Power Supply  (USP)


Gold Mini decoders have solder points for S.U.S.I. so a sound module may be connected.  Gold 10433 and 10440 have a dedicated S.U.S.I. socket  for easy addition of a Sound Module

DCC Digital Command Control Help Click here for more information and Videos of Lenz decoders being installed in DCC ready locomotives

Using Standard and Silver Mini Decoders as Function decodersUsing Standard and Silver Mini Decoders as Function decoders

ImageCodeNameDescriptionPriceQty 
10231-02 Standard+ V2 ABC
LE10231-0210231-02 Standard+ V2 ABC

Lenz  10231-02 "Standard +V2" 1.0/1.8A 4 function output A,B,C,D. NEM 652 plug.

Easy to Install - See Film
Manual in German, English and French


The DIGITAL plus STANDARD locomotive decoder is suitable for all DC
locomotives with continuous current draw of 1.0 Amp.or less.


The characteristics of the decoder are:

  • Super smooth and silent high frequency back-emf motor control.
  • Adjustable precision stopping control
  • Shunting Speed on F3
  • Selectable for operation with 14/27, or 28/128 speed steps.
  • Operation on conventional DC layouts is possible or can be disabled.
  • Motor output = 1A continuous, 1.8A max,.
  • Motor and function outputs protected
  • Four function outputs rated at 150mA each with advanced function mapping
  • Function outputs can be set to a timer for electronic uncoupling
  • Directional or independent lighting with dimming and special effects.
  • Support for Multiple traction and long addresses (Loco addresses up to 9,999)
  • Support for programming on the mainline (Programming on Main POM)
  • Support for all forms of programming as described in NMRA RP-9.2.3
  • ABC Braking
  • RailCom
  • Size: L 25mm x W 15mm x H 3.8mm

£22.50
10310-02 Silver mini + with wires
LE10310-0210310-02 Silver mini + with wires

Lenz 10310-02 "Silver Mini+" 0.5/0.8A with cables. 2 Function outputs

Usually in stock.

Manual in German, English and French

The Digital Plus Silver Mini locomotive decoder is suitable for all DC locomotives with continuous current draw of 0.5Amp or less.

The characteristics of the decoder are:

  • Super smooth and silent high frequency back emf motor control
  • Supports Automatic Braking Control (ABC)
  • Shunting speed
  • Suitable for operation with 14/27 or 28/128 speed steps
  • Operation on conventional DC layouts is posible or may be disabled
  • Motor output = 0.5A continuous 0.8A max
  • Motor and function outputs have short circuit protection
  • Two function outputs rated at 100mA each with advanced function mapping
  • Directional or independent lighting with dimming and special effects
  • Support for Multiple traction and long addresses (Loco addresses up to 9,999)
  • Support for programming on the mainline (Programming on Main POM)
  • Support for all forms of programming as described in NMRA RP-9.2.3
  • RailCom
  • SUSI solder points - new to 10310-02
  • Size: L 10.6 x W 7.5 x H 2.6mm

£38.45
10311-02 Silver mini+ NEM 651 plug
LE10311-0210311-02 Silver mini+ NEM 651 plug

Lenz 10311-02 "Silver Mini+" 0.5/0.8A with NEM 651 plug. 2 Function outputs

Usually in stock.


Easy to Install - See Film

Manual in German, English and French

The Digital Plus Silver Mini locomotive decoder is suitable for all DC locomotives with continuous current draw of 0.5Amp or less.

The characteristics of the decoder are:

  • Super smooth and silent high frequency back emf motor control
  • Supports Automatic Braking Control (ABC)
  • Shunting speed on F3
  • Suitable for operation with 14/27 or 28/128 speed steps
  • Operation on conventional DC layouts is posible or may be disabled
  • Motor output = 0.5A continuous 0.8A max
  • Motor and function outputs have short circuit protection
  • Two function outputs rated at 100mA each with advanced function mapping
  • Directional or independent lighting with dimming and special effects
  • Support for Multiple traction and long addresses (Loco addresses up to 9,999)
  • Support for programming on the mainline (Programming on Main POM)
  • Support for all forms of programming as described in NMRA RP-9.2.3
  • RailCom
  • SUSI solder points - new to 10311-02
  • Size: L 10.6 x W 7.5 x H 2.6mm

£38.45
10312-01 Silver PluX12
LE10312-0110312-01 Silver PluX12

Lenz 10312-01 "Silver PluX12 0.75/1.0A . 4 Function outputs

Click here for an explanation of the PluX series of decoder interfaces

Easy to Install - See Film

Manual in German, English and French

The Digital Plus Silver  locomotive decoder is suitable for all DC locomotives with continuous current draw of 0.75Amp or less.

The characteristics of the decoder are:

  • Super smooth and silent high frequency back emf motor control
  • Supports Automatic Braking Control (ABC)
  • Shunting speed on F3
  • Suitable for operation with 14/27 or 28/128 speed steps
  • Operation on conventional DC layouts is posible or may be disabled
  • Motor output = 0.75A continuous 1.0A max
  • Motor and function outputs have short circuit protection
  • Four function outputs rated at 500mA each with advanced function mapping
  • Directional or independent lighting with dimming and special effects
  • Support for Multiple traction and long addresses (Loco addresses up to 9,999)
  • Support for programming on the mainline (Programming on Main POM)
  • Support for all forms of programming as described in NMRA RP-9.2.3
  • RailCom
  • SUSI solder points
  • Size: L 20 x W 11 x H 3.9mm.

£29.95
10318-01 Silver Next18
LE10318-0110318-01 Silver Next18

Lenz 10318-01 Silver Next18
 

The Lenz Digital Plus Silver locomotive decoder is suitable for all DC Locos with Next18 interface.  At the moment Next 18 is found in Bachmann Liliput and Tillig products.

Click here for an explanation of Next18 connections

The characteristics of the decoder are:

  • Super smooth and silent high frequency back emf motor control
  • Supports Automatic Braking Control (ABC)
  • Shunting speed on F3
  • Suitable for operation with 14/27 or 28/128 speed steps
  • Operation on conventional DC layouts is posible or may be disabled
  • Motor and function outputs have short circuit protection
  • Seven function outputs rated at 500mA each with advanced function mapping
  • Directional or independent lighting with dimming and special effects
  • Support for Multiple traction and long addresses (Loco addresses up to 9,999)
  • Support for programming on the mainline (Programming on Main POM)
  • Support for all forms of programming as described in NMRA RP-9.2.3
  • RailCom

£38.45
10321-01 Silver 21+ with 21 pin plug
LE10321-0110321-01 Silver 21+ with 21 pin plug

Lenz 10321-01 "Silver 21 +" 1.0/1.8A with 21 pin plug  (NEM 660)

Easy to Install - See Film

Manual in German, English and French

The DIGITAL plus SILVER 21 locomotive decoder has a built in NMRA 21 pin
plug and is suitable for all DC locomotives with continuous current draw of 1.0
Amp. or less. For OO/HO models with 21MTC decoder plug.

The characteristics of the decoder are:

  • Super smooth and silent high frequency back-emf motor control.
  • Supports Automatic Braking Control (ABC)
  • Adjustable precision stopping control.
  • Shunting speed on F3
  • Selectable for operation with 14/27, or 28/128 speed steps.
  • Operation on conventional DC layouts is possible or can be disabled.
  • Motor output = 1A continuous, 1.8A max, > 5 A stall.
  • Motor and function outputs protected.
  • Four function outputs rated at 100mA each with advanced function mapping.
  • Directional or independent lighting with dimming and special effects.
  • Support for Multiple traction and long addresses (Loco addresses up to 9,999)
  • Support for programming on the mainline (Programming on Main POM).
  • Support for all form of programming as described in NMRA RP-9.2.3
  • RailCom
  • Size: L 20.5 mm x W 15.5 mm x H3.92 mm
£33.95
10322-01 Silver+ PluX22
LE10322-0110322-01 Silver+ PluX22

Lenz 10322-01 "Silver PluX22 +" 1.0/1.8A  (NEM 658)

New 2018 Now available
Manual in German, English and French 

The DIGITAL plus SILVER PluX22 locomotive decoder has a built in NMRA 22 pin
plug and is suitable for all DC locomotives with continuous current draw of 1.0
Amp. or less. For OO/HO models with PluX22 decoder plug

The characteristics of the decoder are:

  • Super smooth and silent high frequency back-emf motor control.
  • Supports Automatic Braking Control (ABC)
  • Adjustable precision stopping control.
  • Shunting speed on F3
  • Selectable for operation with 14/27, or 28/128 speed steps.
  • Operation on conventional DC layouts is possible or can be disabled.
  • Motor output = 1A continuous, 1.8A max, > 5 A stall.
  • Motor and function outputs protected.
  • 9 function outputs rated at 100mA each with advanced function mapping. (Maximum for all functions 500mA
  • Directional or independent lighting with dimming and special effects.
  • Support for Multiple traction and long addresses (Loco addresses up to 9,999)
  • Support for programming on the mainline (Programming on Main POM).
  • Support for all forms of programming as described in NMRA RP-9.2.3
  • S.U.S.I. Interface through pins 1-4 in the PluX interface for specialist modules
  • RailCom
  • Size: L 22 mm x W 15mm x H 6mm
£32.50
10330-01 Silver Direct+ NEM 652 plug
LE10330-0110330-01 Silver Direct+ NEM 652 plug

Lenz 10330-01 "Silver Direct +" 1.0/1.8A with NEM 652 plug 

Manual in German, English and French


The DIGITAL plus SILVER locomotive decoder has a built in NMRA 8 pin plug and is suitable for all DC locomotives with continuous current draw of 1.0 Amp. or less that have a DCC Medium plug socket.

The characteristics of the decoder are:

  • Super smooth and silent high frequency back-emf motor control.
  • Supports Automatic Braking Control (ABC)
  • Adjustable precision stopping control.
  • Shunting speed on F3
  • Selectable for operation with 14/27, or 28/128 speed steps.
  • Operation on conventional DC layouts is possible or can be disabled.
  • Motor output = 1A continuous, 1.8A max, > 5 A stall.
  • Motor and function outputs protected.
  • Four function outputs rated at 100mA each with advanced function mapping.
  • Directional or independent lighting with dimming and special effects.
  • Support for Multiple traction and long addresses (Loco addresses up to 9,999)
  • Support for programming on the mainline (Programming on Main POM)
  • Support for all form of programming as described in NMRA RP-9.2.3
  • RailCom
  • Size: L 19mm x W 13 mm x H 3.35mm.

£35.85
10331-01 Silver+ NMRA 652 plug
LE10331-0110331-01 Silver+ NMRA 652 plug

Lenz 10331-01 "Silver +" 1.0/1.8A with NMRA 652 plug

Now replaced by the uprated 10231-02 Standard decoder

Manual in German, English and French

£0.00
10410 "Gold mini"0.5/0.8A with cable 2 Function outputs
LENZ1041010410 "Gold mini"0.5/0.8A with cable 2 Function outputs

Lenz  10410 "Gold mini +"0.5/0.8A with cable 2 Function outputs

Manual in German, English and French

The DIGITAL plus GOLD Mini locomotive decoder is suitable for all DC locomotives with continuous current draw of 0.5 Amp. or less.

The characteristics of the decoder are:

  • Super smooth and silent high frequency back-emf motor control.
  • USP with optional power module for operation on dirty track
  • Supports Automatic Braking Control (ABC)
  • Adjustable precision stopping control
  • Shunting speed on F3
  • Selectable for operation with 14/27, or 28/128 speed steps.
  • Operation on conventional DC layouts is possible or can be disabled.
  • Motor output = 0.5A continuous, 0.8A max, > 2 A stall.
  • Motor and function outputs protected
  • Two function outputs rated at 100mA each with advanced function mapping
  • Directional or independent lighting with dimming and special effects.
  • Support for Multiple traction and long addresses (Loco addresses up to 9,999)
  • Support for programming on the mainline (Programming on Main POM)
  • Support for all form of programming as described in NMRA RP-9.2.3
  • RailCom
  • Size: L 0.43" x W 0.35"x H 0.11, L 11mm x W 9mm x H 2.8 mm

£45.85
10411 "Gold mini"0.5/0.8A with NEM 651 plug 2 Function outputs
LENZ1041110411 "Gold mini"0.5/0.8A with NEM 651 plug 2 Function outputs

Lenz  10411 "Gold mini +" 0.5/0.8A with NEM 651 plug 2 Function outputs

Manual in German, English and French

The DIGITAL plus GOLD Mini locomotive decoder is suitable for all DC locomotives with continuous current draw of 0.5 Amp. or less.

The characteristics of the decoder are:

  • Super smooth and silent high frequency back-emf motor control.
  • USP with optional power module for operation ondirty track
  • Supports Automatic Braking Control (ABC)
  • Adjustable precision stopping control
  • Shunting Speed on F3
  • Selectable for operation with 14/27, or 28/128 speed steps.
  • Operation on conventional DC layouts is possible or can be disabled.
  • Motor output = 0.5A continuous, 0.8A max, > 2 A stall.
  • Motor and function outputs protected
  • Two function outputs rated at 100mA each with advanced function mapping
  • Directional or independent lighting with dimming and special effects.
  • Support for Multiple traction and long addresses (Loco addresses up to 9,999)
  • Support for programming on the mainline (Programming on Main POM)
  • Support for all form of programming as described in NMRA RP-9.2.3
  • RailCom
  • Size: L 0.43" x W 0.35"x H 0.13, L 11mm x W 9mm x H 3.3 mm
£45.85
10433 "Gold" 1.0/1.8A with cable and NEM 652 plug
LENZ1043310433 "Gold" 1.0/1.8A with cable and NEM 652 plug

Lenz  10433 "Gold +" 1.0/1.8A with cable and NEM 652 plug

Manual in German, English and French

The DIGITAL plus GOLD locomotive decoder is suitable for all DC locomotives with continuous current draw of 1.0 Amp. or less.


The characteristics of the decoder are:

  • Super smooth and silent high frequency back-emf motor control.
  • USP with optional power module for operation on dirty track
  • Supports Automatic Braking Control (ABC)
  • Adjustable precision stopping control
  • Shunting Speed on F3
  • Selectable for operation with 14/27, or 28/128 speed steps.
  • Operation on conventional DC layouts is possible or can be disabled.
  • Motor output = 1A continuous, 1.8A max, > 5 A stall.
  • Motor and function outputs protected
  • Four function outputs rated at 200mA each with advanced function mapping
  • Directional or independent lighting with dimming and special effects.
  • Support for Multiple traction and long addresses (Loco addresses up to 9,999)
  • Support for programming on the mainline (Programming on Main POM)
  • Support for all form of programming as described in NMRA RP-9.2.3
  • RailCom

Size: L 0.91" x W 0.66"x H 0.2" L 23.0 mm x W 16.5 mm x H 6.5 mm

£38.25
 
LENZ10440-0110440+ Gold Maxi Plus

Lenz 10440-01 "Gold Maxi +" 3.0/5A with screw terminals and 10 function outputs 

The DIGITAL plus GOLD MAXI + locomotive decoder is suitable for all DC locomotives with continuous current draw of 4.0 Amp. or less.

The characteristics of the decoder are:

  • Super smooth and silent high frequency back-emf motor control.
  • Integrated USP power module for operation on dirty track
  • Supports Automatic Braking Control (ABC)
  • Adjustable precision stopping control
  • Shunting Speed on F3
  • Selectable for operation with 14/27, or 28/128 speed steps.
  • Operation on conventional DC layouts is possible or can be disabled.
  • Motor output = 4A continuous, 5A max, > 10A stall.
  • Motor and function outputs protected
  • 12 function outputs rated at 100mA each with advanced function mapping Combined total 1000mA
  • Support for electronic uncoupling
  • Directional or independent lighting with dimming and special effects.
  • Support for Multiple traction and long addresses (Loco addresses up to 9,999)
  • Support for programming on the mainline (Programming on Main POM)
  • Support for all form of programming as described in NMRA RP-9.2.3
  • RailCom
  • Size: L 2.76" x W 1.14"x H 0.47" 70 mm x 29 mm x 12 mm
New item 2018 Price to be confirmed - The 10440+ will replace the current 10440 Gold Maxi later in 2018

£0.00
10490 Power 1 for Gold Decoder USP
LENZ1049010490 Power 1 for Gold Decoder USP

Lenz  10490 Power 1 for Gold Decoder USP 

Manual in German, English and French

POWER-1 is an energy storage module for use with GOLD Series decoders. This storage unit supplies the decoder and the locomotive with power when there is an interruption of electrical connection to the track (e.g. dirty tracks).

The USP circuit of the GOLD decoders allows the decoder to receive the DCC signal without a direct electrical connection to the track. During the period where track electrical power is not present the USP circuit switches to the backup power provided from the POWER-1 storage module to ensure continued control of the motor. If digital information is no longer transmitted, the motor will be deactivated. This prevents the locomotive wheels from continuing to turn, for example: in the case of a derailment. POWER-1 is like an "electronic flywheel", but thanks to the USP technology the stored energy is used only when necessary.

Size 22 x 13,3 x 9,4 mm

£46.50
10493 Power 3 for Gold Decoder USP
LENZ1049310493 Power 3 for Gold Decoder USP

Lenz 10493 Power 3 for Gold Decoder USP

Manual in German, English and French

POWER-3 is an energy storage module for use with GOLD series decoders. This storage unit supplies the decoder and the locomotive with power when there is an interruption of electrical connection to the track
(e.g. dirty tracks).


The USP circuit of the GOLD decoders allows the decoder to receive the DCC signal without a direct electrical connection to the track. During the period where track electrical power is not present the USP circuit switches to the backup power provided from the POWER-3 storage module to ensure continued control of the motor. If digital information is no longer transmitted, the motor will be deactivated. This prevents the locomotive wheels from continuing to turn, for example: in the case of a derailment.

POWER-3 is like an "electronic flywheel", but thanks to the USP technology the stored energy is used only when necessary and the DCC packets will continue to be received and acted upon so long as the decoder remains powered.

£54.70
15105 LRC100 RailCom Transmitter Module 5 pack
LENZ1510515105 LRC100 RailCom Transmitter Module 5 pack

Lenz 15105 LRC100 RailCom Transmitter Module 5 pack

Manual in German, English and French

One transmitter module LRC100 is required for every locomotive whose address is to be read out, unless the decoder installed inside the locomotive is already fitted with one of these modules. Simply connect the transmitter module to the locomotive's track contacts. Thanks to its compact size, the transmitter module may be installed in almost any locomotive.

Address Information is transmitted via the normal track connections.  This address can be made visible on suitable displays (eg the LRC120).  The contents of CV's may also be displayed.

All new Lenz decoders are provided with RailCom as standard. The LRC100 allows you to upgrade older decoders to give them this function.  The LRC100 module on its own provides no motor or function control.

Requirements for RailCom

The necessary "blanking interval" (also known as RailCom cut-out) must be activated in order to run RailCom  (activation instructions are given in the booklet provided with the RailCom Transmitter modules and with all new Lenz decoders).  You will need an LZV100 command station or LV102 amplifier to run Railcom, an older LZ100 (version 3.5 or later) may be used in conjuction with an LV102 amplifier in order to run RailCom. - (Please note that amplifiers LV100, LV101, LV200 and compact are unable to provide the Blanking Interval necessary for RailCom).

£68.25


 
 Return to main site View Cart