Lenz LH101R Wireless handset

Lenz LH101R wireless handset and LTM101 wireless receiver

LH101R Wireless handset

The New LH101R is designed to work with the following Lenz command stations:

LZV100 from Version 3.6 ( Versions from 3.0 may be updated to 3.6)

LZV200 from Version 3.8

The main control of the LH101R is identical to the wired LH101 version (LH101 help section linked below)

The LH101R uses 2 x AA Batteries. As battery power gets low a low battery symbol will light up on screen (You may also notice the screen dimming) This will occur when the batteries fall below 1.4v. If you are using rechargeable cells the low battery light will illuminate when these fall below 2.0v

You can also view battery voltage in the LH101R setup menu

The LH101R may also be used with a cable - just turn off the battery switch (underneath the LH101R) and plug in an XpressNet cable

The LTM101 Wireless receiver

The LTM101 may be connected to the command station using the XpressNet DIN plug or through an LA152 faceplate

Up to 4 LH101R may be connected to each LTM101 so the LTM101 uses 4 XpressNet addresses. You can use 2 x LTM101 on a layout for a maximum of 8 LH101R wireless handsets.

At first use an LH101R needs to be bound to the LTM101 and this is done via a push button on the LTM101. After this LH101R will bind automatically to the LTM101 each time it is turned on.