Now available
English manual  PDF download  (Manual - German, English French )


Lenz 20200 LZV200 Command station incl. 5Amp output
Lessons learnt from 25 years of the LZV100 and with Prototypes of the new LZV200 have resulted in some new features

• Update by USB memory stick - unit no longer has to be sent off for upgrading
• Integrated computer interface
• Adjustable Track voltage and maximum current
• Global RailCom detector
• CVs can now be read during operation, not just on the programming track - (RailCom enabled decoders and LRC120 display are needed for this)
• Internal Memory battery is now replaceable - CR2450 

The future new features and functions are shown in red
Updates: can be done easily with a USB memory stick.
Locomotive: 9,999 addresses for digital locomotives.
Locomotive and configuration: up to 29 functions are available per address.

69 Functions available using the new generation LH101 and LH101-R (Version 2.1)
For functions 1 to 28, you can set separately whether it is a switched or a momentary function.
This setting is saved to each loco address.
Driving stages: The driving stage modes 28 and 128 are supported. The drive step mode can be set separately for each address.
Double and Traction (MTR): Two or more locomotives can be combined and controlled together. In order to manage the MTR, the LZV200 has an internal database, in which each address is entered, whether and if so, in which MTR the relevant address is integrated. This database can be queried and modified by XpressNet handsets and devices.
RailCom: The built-in global RailCom detector will allow the RAILCOM data of all locomotives located in the supply area of the LZV200 to be received. From other supply areas (e.g. LV102), the RAILCOM data is forwarded to the LZV200 with the RailCom transmitter and can be processed there.
Programming during Operation (POM): You program the properties of a decoder while the locomotive is somewhere on the system. For example, drive Your locomotive in front of a heavy freight train and adjust the driving delay to the train!
The content of CVs can also be read out and displayed via the built-in global RailCom detector (if the addressed decoder is able to do so).
Programming on the program track: all 3 programming variants according to NMRA are available with the LZV200: Programming with specification of CV, register programming and page mode.
Magnetic Articles: The address range for magnetic articles (turnouts, signals) we have expanded to 1 to 2048. Point feedback is possible in the range from 1 to 256.
Auto mode: This mode ensures that after switching on your system, the locomotives are restored with the stored data. If this mode is switched on, the driving commands are saved for the above locomotive and sent after switching on. The information of functions F0 to F4 is also sent.
XpressNet: The XpressNet connection is used to establish communication with the input devices. The automatic forwarding of messages of reconfirmable components via XPRESSNET to connected devices means an extremely fast feedback the LZV200 supports XpressNet devices from version 3 onwards.
Output current: The output current of the built-in amplifier is limited to a maximum of 5a. Voltage and maximum current are adjustable.
Protective functions: Thermal overload protection and external voltage protection.
Computer connection: The LZV200 is prepared for computer connection
Housing: Metal

Lenz 80210 Update Stick for LZV200 Software version 4.0

Allows version 3.8 to be upgraded to version 4.0 

Key feature is the increase from 28 to 69 locomotion functions

Version 4 also allows you to upgrade decoder firmware using a PC

This feature was previously only available with the Lenz 23171 decoder programmer

Lenz  21010 Hand controller LH01 


LH01 Help Pages

Link to English Manual

This is Lenz' new entry level XpressNet Handset. The LH01 will work  with LZV100 command station on Version 3.6. The design is minimalistic in order to give the greatest functionality for the least price.
The LH01 Handset has a 4 digit display and one large control knob that works like a games consol control or a system control in a prestige car - the rotary knob can also be pressed in four directions and pressed in the middle so that you can enter the menues.  In this way Lenz can offer a high specification for a low price:

• For up to 9999 digital motor vehicles
• Setting of 4-digit locomotive addresses on Read and Write Programming track
• 28 speed steps
• 29 functions for each locomotive
• Functions can be continuous or momentary by button press
• RailCom enabled programming in operational mode (PoM).  Standard POM can also be performed on decoders without RailCom
• Double traction
• connect up to 31 input devices to our universal input bus XpressNet.
• points, signals and other magnetic articles can be switched.
• Protected against short-circuit and overheat.

Lenz 21101 LH101 Hand controller

New product  - Please note English Language version of the handset now available in the UK.  UK manual available in latest versions - Professionally printed and bound by a local Brackley Firm.
Help pages for the new LH101

• 9999 addresses for digital locomotives
• Rotary Speed control
• addresses are entered via number keys
• Stack of 8 loco addresses for your loco collection (Easy to overwrite with new addresses)
• Control of 29 Locomotive decoder functions (Lights, Smoke, Sound...)
• Locomotive decoder functions can be switched or momentary operation (Momentary is useful for bells and whistles)
• another key serves to change the direction of travel
• emergency stop key serves to stop all locomotives immediately
• display indicates the function
• synchronised control of several locomotives into a double or multiple traction
• if a switch decoder (that supports the feedback function) is used, the LH101 can feed back the real status of points
• this function also allows feedback on the status of the inputs of feedback modules LR101
• Program locomotive and accessory decoders - Programming track and Programming on main (PoM)
• up to 1024 points, signals, magnetic articles and other accessories can be controlled.
• New Routes Mode
• New Club mode  Handset can be limited to a single loco for an inexperienced driver to operate.
• Works with the LZV100 Version 3.6 Software

Link to English manual

Lenz 21102 LH101-R Additional Radio Hand controller.

Digital plus's new LH101-R wireless handheld controller is identical to functionality and operation with the handheld LH101.
Connection to XpressNet control with the radio receiver LTM101.
Up to 4 radio  LH101-R can be operated on a radio receiver LTM101.
The radio technology is being developed in collaboration with Massoth. 
The power is supplied by 2 AA batteries.

Help pages for the new LH101

• 9999 addresses for digital locomotives
• Rotary Speed control
• addresses are entered via number keys
• Stack of 8 loco addresses for your loco collection (Easy to overwrite with new addresses)
• Control of 69 Locomotive decoder functions (Lights, Smoke, Sound...)
• Locomotive decoder functions can be switched or momentary operation (Momentary is useful for bells and whistles)
• another key serves to change the direction of travel
• emergency stop key serves to stop all locomotives immediately
• display indicates the function
• synchronised control of several locomotives into a double or multiple traction
• if a switch decoder (that supports the feedback function) is used, the LH101 can feed back the real status of points
• this function also allows feedback on the status of the inputs of feedback modules LR101
• Program locomotive and accessory decoders - Programming track and Programming on main (PoM)
• up to 1024 points, signals, magnetic articles and other accessories can be controlled.
• New Routes Mode
• New Club mode  Handset can be limited to a single loco for an inexperienced driver to operate.
• Works with the LZV100 Version 3.6 Software

Lenz 21103 Radio Hand controller LH101-R and LTM101 Receiver

Digital plus's new LH101-R wireless handheld controller is identical to functionality and operation With the handheld LH101.
Connection to XpressNet control with the radio receiver LTM101.
Up to 4 radio  LH101-R can be operated on a radio receiver LTM101.
The radio technology is being developed in collaboration with Massoth. 
The power is supplied by 2 AA batteries.

Help pages for the new LH101

• 9999 addresses for digital locomotives
• Rotary Speed control
• addresses are entered via number keys
• Stack of 8 loco addresses for your loco collection (Easy to overwrite with new addresses)
• Control of 69 Locomotive decoder functions (Lights, Smoke, Sound...)
• Locomotive decoder functions can be switched or momentary operation (Momentary is useful for bells and whistles)
• another key serves to change the direction of travel
• emergency stop key serves to stop all locomotives immediately
• display indicates the function
• synchronised control of several locomotives into a double or multiple traction
• if a switch decoder (that supports the feedback function) is used, the LH101 can feed back the real status of points
• this function also allows feedback on the status of the inputs of feedback modules LR101
• Program locomotive and accessory decoders - Programming track and Programming on main (PoM)
• up to 1024 points, signals, magnetic articles and other accessories can be controlled.
• New Routes Mode
• New Club mode  Handset can be limited to a single loco for an inexperienced driver to operate.
• Works with the LZV100 Version 3.6 Software

Lenz 80155 LTM101 Radio Receiver for 21102 LH101-R Radio Handset
 

Additional Wireless base unit

Link to LV103 manual (German, English, French pdf)

Lenz  23151 USB and LAN Interface

In addition to the USB port the new Digital plus interface offers an Ethernet gateway for connecting the system to a PC or to a router. 
Touchcab is back. www.touchcab.com

Connect the new interface via XpressNet to the command station and via Ethernet to a router.

The new interface provides a CV editor and PC control panel.

LAN USB Help and information

Lenz 26001 TR100 Transformer 15V, 45VA for small & medium gauges. Item 26000 with a UK three pin plug

Lenz  26151 TR150 Transformer 15v, 70vA. for large gauges. Item 26150 with a UK three pin plug

Lenz  60101 Set 101 Startset with hand controller LH101

Help Section

English manual for LH101 Handset (Manual - German, English French)

English manual for LZV200 PDF download  (Manual - German, English French )

For large model railway layouts where many motor vehicles, points and signals are used.

• for up to 9999 digital motor vehicles and 1 analog locomotive
• setting of 4-digit locomotive addresses
• 14, 27, 28 or 128 speed steps
• 69 functions for each locomotive (F0-F68)
• double- and multiple-traction
• the setting of automatic control is optional
• Separate Programming track outputs
• CV programming from CV1 to CV1024
• higher requirements are met by adding (an infinite number of) additional amplifiers - LV103
• connect up to 31 input devices to our universal input bus XpressNet.
• programming in operational mode (PoM)
• up to 2048 points, signals and other magnetic articles can be switched, depending on the control device used.
• feedback bus to connect feedback modules and switch decoders that support the feedback function.
• The LZV200 can generate the RailCom Signal (Global RailCom from LH101 V2.0)
• Model Clock (LH101 V2.0)
• Integrated USB PC Interface
• Future updates can be applied using a memory stick

Each set comes with a LZV200 device (which is an amplifier plus command station) and an LH101 hand-held control device.

LZV200 Version 4.0

LH101 Version 2.1

Lenz  60103 Set 101-R Startset with wireless hand controller LH101-R and LTM101 receiver

New product  2021

Help Section

English manual for LH101 Handset (Manual - German, English French)

English manual for LZV200 PDF download  (Manual - German, English French )

For large model railway layouts where many motor vehicles, points and signals are used.

• for up to 9999 digital motor vehicles and 1 analog locomotive
• setting of 4-digit locomotive addresses
• 14, 27, 28 or 128 speed steps
• 69 functions for each locomotive (F0-F68)
• double- and multiple-traction
• the setting of automatic control is optional
• Separate Programming track outputs
• CV programming from CV1 to CV1024
• higher requirements are met by adding (an infinite number of) additional amplifiers - LV103
• connect up to 31 input devices to our universal input bus XpressNet.
• programming in operational mode (PoM)
• up to 2048 points, signals and other magnetic articles can be switched, depending on the control device used.
• feedback bus to connect feedback modules and switch decoders that support the feedback function.
• The LZV200 can generate the RailCom Signal (Global RailCom from LH101 V2.0)
• Model Clock (LH101 V2.0)
• Integrated USB PC Interface
• Future updates can be applied using a memory stick

Each set comes with a LZV200 device (which is an amplifier plus command station) and an LH101 hand-held control device.

LZV200 Version 4.0

LH101-R Version 2.1