A and H Models  
   
 

  Home > Lenz Digital Products > Lenz Control and Transformers



The LZV200 command station is the heart of the Lenz control system.  

The LZV200 takes the instructions that you give to a handset (LH101 or older LH90, LH100) and send them out to the locos and accessories on the layout.  The LZV200 can also receive feedback information from the LR101 modules to allow you to detect where trains are.  
The LZV200 can be powered by a choice of transformers - the TR100 will give it an output of up to 3 amps and the TR150 will give it an output of up to 5amps.  

For larger layouts with more trains running you can supplement the power available with a LV103 Booster.  The LV103 will act as a slave to the LZV200.


DCC Digital Command Control Help This is a link to our DCC Help pages

Lenz LH101 Help sectionLenz LH101 Help section
New hand controller Out now - replaces LH90 and LH100
LH01 and SET01LH01 and SET01
Help section for the entry Level handset LH01
Notes on LH100 HandsetNotes on LH100 Handset
The LH100 has now been replaced by the LH101
Notes on LH90 HandsetNotes on LH90 Handset
Product now discontinued
SET101 + LZV200 Command StationSET101 + LZV200 Command Station
The new (2019) Lenz Set101 (Item 60101) and the LZV200 command station (Item 20200)

ImageCodeNameDescriptionPriceQty 
20200 LZV200 Command station incl. 5Amp output Version 3.8 software
LENZ2020020200 LZV200 Command station incl. 5Amp output Version 3.8 software

Now available
English manual  PDF download  (Manual - German, English French )



Lenz
 20200 LZV200 Command station incl. 5Amp output
Lessons learnt from 25 years of the LZV100 and with Prototypes of the new LZV200 have resulted in some new features

  • Update by USB memory stick - unit no longer has to be sent off for upgrading
  • Integrated computer interface
  • Adjustable Track voltage and maximum current
  • Global RailCom detector
  • CVs can now be read during operation, not just on the programming track - (RailCom enabled decoders and LRC120 display are needed for this)
  • Internal Memory battery is now replaceable - CR2450 

 

The future new features and functions are shown in red
Updates: can be done easily with a USB memory stick.
Locomotive: 9,999 addresses for digital locomotives.
Locomotive and configuration: up to 29 functions are available per address.
For functions 1 to 28, you can set separately whether it is a switched or a momentary function.
This setting is saved to each loco address.
Driving stages: The driving stage modes 28 and 128 are supported. The drive step mode can be set separately for each address.
Double and Traction (MTR): Two or more locomotives can be combined and controlled together. In order to manage the MTR, the LZV200 has an internal database, in which each address is entered, whether and if so, in which MTR the relevant address is integrated. This database can be queried and modified by XpressNet handsets and devices.
RailCom: The built-in global RailCom detector will allow the RAILCOM data of all locomotives located in the supply area of the LZV200 to be received. From other supply areas (e.g. LV102), the RAILCOM data is forwarded to the LZV200 with the RailCom transmitter and can be processed there.
Programming during Operation (POM): You program the properties of a decoder while the locomotive is somewhere on the system. For example, drive Your locomotive in front of a heavy freight train and adjust the driving delay to the train!
The content of CVs can also be read out and displayed via the built-in global RailCom detector (if the addressed decoder is able to do so).
Programming on the program track: all 3 programming variants according to NMRA are available with the LZV200: Programming with specification of CV, register programming and page mode.
Magnetic Articles: The address range for magnetic articles (turnouts, signals) we have expanded to 1 to 2048. Point feedback is possible in the range from 1 to 256.
Auto mode: This mode ensures that after switching on your system, the locomotives are restored with the stored data. If this mode is switched on, the driving commands are saved for the above locomotive and sent after switching on. The information of functions F0 to F4 is also sent.
XpressNet: The XpressNet connection is used to establish communication with the input devices. The automatic forwarding of messages of reconfirmable components via XPRESSNET to connected devices means an extremely fast feedback the LZV200 supports XpressNet devices from version 3 onwards.
Output current: The output current of the built-in amplifier is limited to a maximum of 5a. Voltage and maximum current are adjustable.
Protective functions: Thermal overload protection and external voltage protection.
Computer connection: The LZV200 is prepared for computer connection
Housing: Metal
£323.75
21010 Handset LH01
LENZ2101021010 Handset LH01

Lenz  21010 Hand controller LH01 


LH01 Help Pages

Link to English Manual

This is Lenz' new entry level XpressNet Handset. The LH01 will work  with LZV100 command station on Version 3.6. The design is minimalistic in order to give the greatest functionality for the least price.
The LH01 Handset has a 4 digit display and one large control knob that works like a games consol control or a system control in a prestige car - the rotary knob can also be pressed in four directions and pressed in the middle so that you can enter the menues.  In this way Lenz can offer a high specification for a low price:

  • For up to 9999 digital motor vehicles
  • Setting of 4-digit locomotive addresses on Read and Write Programming track
  • 28 speed steps
  • 29 functions for each locomotive
  • Functions can be continuous or momentary by button press
  • RailCom enabled programming in operational mode (PoM).  Standard POM can also be performed on decoders without RailCom
  • Double traction
  • connect up to 31 input devices to our universal input bus XpressNet.
  • points, signals and other magnetic articles can be switched.
  • Protected against short-circuit and overheat.
£89.75
21101 LH101 Hand controller
LENZ2110121101 LH101 Hand controller

Lenz 21101 LH101 Hand controller

New product  - Please note English Language version of the handset now available in the UK.  UK manual available in latest versions - Professionally printed and bound by a local Brackley Firm.
Help pages for the new LH101

  • 9999 addresses for digital locomotives
  • Rotary Speed control
  • addresses are entered via number keys
  • one key allows you to change between the last two addresses ('toggle')
  • Stack of 8 loco addresses for your loco collection (Easy to overwrite with new addresses)
  • Control of 29 Locomotive decoder functions (Lights, Smoke, Sound...)
  • Locomotive decoder functions can be switched or momentary operation (Momentary is useful for bells and whistles)
  • another key serves to change the direction of travel
  • emergency stop key serves to stop all locomotives immediately
  • display indicates the function
  • synchronised control of several locomotives into a double or multiple traction
  • if a switch decoder (that supports the feedback function) is used, the LH101 can feed back the real status of points
  • this function also allows feedback on the status of the inputs of feedback modules LR101
  • Program locomotive and accessory decoders - Programming track and Programming on main (PoM)
  • up to 1024 points, signals, magnetic articles and other accessories can be controlled.
  • New Routes Mode
  • New Club mode  Handset can be limited to a single loco for an inexperienced driver to operate.
  • Works with the LZV100 Version 3.6 Software
£165.00
21102 LH101-R Additional Radio Hand controller
LENZ2110221102 LH101-R Additional Radio Hand controller

Lenz 21102 LH101-R Additional Radio Hand controller.

New product 2020  - Price to be confirmed


Digital plus's new LH101-R wireless handheld controller is identical to functionality and operation with the handheld LH101.
Connection to XpressNet control with the radio receiver LTM101.
Up to 4 radio  LH101-R can be operated on a radio receiver LTM101.
The radio technology is being developed in collaboration with Massoth. 
The power is supplied by 2 AA batteries.


Help pages for the new LH101

  • 9999 addresses for digital locomotives
  • Rotary Speed control
  • addresses are entered via number keys
  • one key allows you to change between the last two addresses ('toggle')
  • Stack of 8 loco addresses for your loco collection (Easy to overwrite with new addresses)
  • Control of 29 Locomotive decoder functions (Lights, Smoke, Sound...)
  • Locomotive decoder functions can be switched or momentary operation (Momentary is useful for bells and whistles)
  • another key serves to change the direction of travel
  • emergency stop key serves to stop all locomotives immediately
  • display indicates the function
  • synchronised control of several locomotives into a double or multiple traction
  • if a switch decoder (that supports the feedback function) is used, the LH101 can feed back the real status of points
  • this function also allows feedback on the status of the inputs of feedback modules LR101
  • Program locomotive and accessory decoders - Programming track and Programming on main (PoM)
  • up to 1024 points, signals, magnetic articles and other accessories can be controlled.
  • New Routes Mode
  • New Club mode  Handset can be limited to a single loco for an inexperienced driver to operate.
  • Works with the LZV100 Version 3.6 Software
£0.00
21103  Radio Hand controller LH101-R and LTM101 Receiver
LENZ2110321103 Radio Hand controller LH101-R and LTM101 Receiver

Lenz 21103 Radio Hand controller LH101-R and LTM101 Receiver

New product expected 2020   - Price to be confirmed 

Digital plus's new LH101-R wireless handheld controller is identical to functionality and operation With the handheld LH101.
Connection to XpressNet control with the radio receiver LTM101.
Up to 4 radio  LH101-R can be operated on a radio receiver LTM101.
The radio technology is being developed in collaboration with Massoth. 
The power is supplied by 2 AA batteries.


Help pages for the new LH101

  • 9999 addresses for digital locomotives
  • Rotary Speed control
  • addresses are entered via number keys
  • one key allows you to change between the last two addresses ('toggle')
  • Stack of 8 loco addresses for your loco collection (Easy to overwrite with new addresses)
  • Control of 29 Locomotive decoder functions (Lights, Smoke, Sound...)
  • Locomotive decoder functions can be switched or momentary operation (Momentary is useful for bells and whistles)
  • another key serves to change the direction of travel
  • emergency stop key serves to stop all locomotives immediately
  • display indicates the function
  • synchronised control of several locomotives into a double or multiple traction
  • if a switch decoder (that supports the feedback function) is used, the LH101 can feed back the real status of points
  • this function also allows feedback on the status of the inputs of feedback modules LR101
  • Program locomotive and accessory decoders - Programming track and Programming on main (PoM)
  • up to 1024 points, signals, magnetic articles and other accessories can be controlled.
  • New Routes Mode
  • New Club mode  Handset can be limited to a single loco for an inexperienced driver to operate.
  • Works with the LZV100 Version 3.6 Software
£0.00
22103 LV103 Amplifier, 5Amp output
LENZ2210322103 LV103 Amplifier, 5Amp output
Lenz  22103 LV103 Amplifier, 5Amp output

New 2019 - now available

The amplifier:
LV103 was designed to meet the safety requirements for gauge O, H0, TT and N operation. Track voltage: 11 to 22V. Maximum load capacity: up to 5A. Overload results in a temporary safety shut-off of the amplifier. The TR150 is a suitable power supply unit. The LV103 supports RailCom operation.

  • Ultra clean DCC Track Power
  • Adjustable DCC Track Voltage
  • Opto-isolation and thermal protection for Safety
  • Short and overload protection
  • Designed to meet NMRA RP-9.1.2
  • Includes RP-9.3.1 cutout device
  • Needs either a TR100 or TR150 transformer





Link to LV103 manual (German, English, French pdf)

£155.00
22500 LG100 Brake module
LENZ2250022500 LG100 Brake module

Lenz 22500 LG100 Brake module

The brake generator LG100 serves to simulate real-life starting and stopping in front of and behind the signal. Contrary to ABC braking modules, the brake generator LG100 influences all locomotive decoders, not only Gold decoders. The LG100 is the forerunner of the ABC technology. The brake generator sends a special data signal to the locomotive decoder; this signal triggers the braking procedure. Sectioning points are required in front of and behind the signal. The train brakes slowly and comes to a halt in front of the stop signal. When the signal is released, the train accelerates slowly to the speed set in the decoder. A brake generator can control all braking sections of the model railway layout. You need a separate amplifier (LV101, LV102 or LV200) to operate the brake generator. The train lighting remains switched on, even after the train has come to a halt. Contrary to ABC braking modules, passage in opposite direction is not possible. The LG100 influences the entire braking section. This means that a locomotive approaching from the opposite direction will also receive the braking command.

£57.25
23151 USB and Ethernet Interface
LE2315123151 USB and Ethernet Interface

Lenz  23151 USB and LAN Interface

In addition to the USB port the new Digital plus interface offers an Ethernet gateway for connecting the system to a PC or to a router. 
Touchcab is back. www.touchcab.com

Connect the new interface via XpressNet to the command station and via Ethernet to a router.

The new interface provides a CV editor and PC control panel.

LAN USB Help and information

£165.95
26001 TR100 Transformer 15v, 45vA
LENZ2600126001 TR100 Transformer 15v, 45vA

Lenz 26001 TR100 Transformer 15V, 45VA for small & medium gauges. Item 26000 with a UK three pin plug

£66.95
26150 TR150 Transformer 15v, 70vA
LENZ2615126150 TR150 Transformer 15v, 70vA

Lenz  26151 TR150 Transformer 15v, 70vA. for large gauges. Item 26150 with a UK three pin plug

£83.25
60101 Set 101 Startset with hand controller LH101
LENZ6010160101 Set 101 Startset with hand controller LH101

Lenz  60101 Set 101 Startset with hand controller LH101

Now available
Help Section

English manual for LH101 Handset 
(Manual - German, English French)

English manual for LZV200 PDF download  (Manual - German, English French )

For large model railway layouts where many motor vehicles, points and signals are used.

  • for up to 9999 digital motor vehicles and 1 analog locomotive
  • setting of 4-digit locomotive addresses
  • 14, 27, 28 or 128 speed steps
  • 28 functions for each locomotive
  • double- and multiple-traction
  • the setting of automatic control is optional
  • Separate Programming track outputs
  • CV programming from CV1 to CV1024
  • higher requirements are met by adding (an infinite number of) additional amplifiers - LV103
  • connect up to 31 input devices to our universal input bus XpressNet.
  • programming in operational mode (PoM)
  • up to 2048 points, signals and other magnetic articles can be switched, depending on the control device used.
  • feedback bus to connect feedback modules and switch decoders that support the feedback function.
  • The LZV200 can generate the RailCom Signal (Global RailCom from LH101 V2.0)
  • Model Clock (LH101 V2.0)
  • Integrated USB PC Interface
  • Future updates can be applied using a memory stick

Each set comes with a LZV200 device (which is an amplifier plus command station) and an LH101 hand-held control device.

This set needs an additional Transformer.  There is the choice of the TR100 (3 Amp) or the TR150 (5 Amp)
 
£365.00


 
 Return to main site View Cart