A and H Models  
   
 

  Home > DCC Digital Command Control Help + other items of help for Railway Modellers > The Uhlenbrock DCC System > DAISY II Handset

DAISY II 66300 LocoNet HandsetDAISY II 66300 LocoNet Handset
Films showing the New DCC Handset
DAISY II Tool - PC ProgrammeDAISY II Tool - PC Programme
This programme allows you to customise the DAISY II handset as well as backing up and transferring locomotive data.
DAISY II Software updateDAISY II Software update

ImageCodeNameDescriptionPriceQty 
Uhlenbrock 62250 5-Way Distribution Box
UH62250Uhlenbrock 62250 5-Way Distribution Box

Uhlenbrock 62250 5-Way Distribution Box (Fleischmann 6836)

LocoNet distribution box 1 plug to 5 sockets

£8.95
Uhlenbrock 62260 LocoNet Distribution Panel
UH62260Uhlenbrock 62260 LocoNet Distribution Panel

Uhlenbrock 62260 6-Way LocoNet Distribution Panel

The locoNet distribution panel may be fitted under a layout or mounted into the layout frame, with the enclosed front panel.  The unit also has an inbuilt load indicator.

If you connect the 62270 transformer you can provide an additional 500mA to three of the locoNet outputs  (These will be LocoNet T).  The remaining LocoNet outputs will be LocoNet T or LocoNet B depending on which LocoNet output on the command station they are connected to.

£24.70
Uhlenbrock 63120 USB - LocoNet interface
UH63120Uhlenbrock 63120 USB - LocoNet interface

Uhlenbrock 63120 USB-LocoNet Interface + LocoNet Tool

The USB-LocoNet-Interface connects the PC directly to the LocoNet with the following systems:
• Uhlenbrock Intellibox, DAISY, Track-Control, IntelliLight
• Märklin 6021 with 6021-Infrared & LocoNet adapter
• Fleischmann Twin-Center, ProfiBoss, LokBoss
• PIKO Power Box
• Digitrax centers without PC interfaces
The USB-LocoNet-Interface can be used with the Windows 2000, XP and Vista (32 bits, without active user
account control) operating systems. A support for older Windows of systems like 95 or 98 is not provided.
The USB-LocoNet-Interface is supplied with the software "LocoNet-Tool". With LocoNet-Tool you can
configure, Uhlenbrock LocoNet modules such as Feedback modules, Switch modules, Displays and the
LISSY system via the LocoNet-System. Furthermore the software contains a LocoNet Monitor with which you
can supervise your LocoNet and analyze automatic procedures.
If you want use the LocoNet-Tool with an Intellibox, Twin-Center or PIKO Power Box then you must first
access our Internet site www.uhlenbrock.de to register it with the serial number shown below and the serial
number of your digital center.
The USB-LocoNet-Interface, with PC control programs, can be used for layout control. All PC programs,
which support the LocoNet protocol, can be installed for layout control.
Note: Before you connect your new USB-LocoNet-Interface with the PC, the driver for the interface must be installed. If you connect the interface with the PC before this it may malfunction.

£84.75
Uhlenbrock 66350 DAISY II  additional radio handset
UH66350Uhlenbrock 66350 DAISY II additional radio handset

Uhlenbrock 66350 DAISY II Additional Radio Handset (Expansion to set 64400)
The 66350 Daisy II is an additional control handset that connects to the radio master in set 64400.  Up to 20 handsets can connect to the Radio Master.

  • High visibility display with yellow text on a black background
  • Intuative menu navigation
  • supports 9,999 loco addresses
  • 29+ locomotive functions (actually 32,768 are available)
  • 128 routes
  • Locomotive database with name and function symbols transfers from Intellibox II
  • 2048 Solenoid addresses (Points, signals, etc...)
  • Connects to all Intellibox control systems as well as Twin Center and Piko Powerbox

£235.00


 
 Return to main site View Cart